This page introduces examples of how to use pipe clamp products compatible with Ø20mm diameters. Please use them as reference examples for securing, positioning, and preventing wobble in various pipes and poles. We will add more ideas from time to time.
Custom setup for mounting measuring equipment on a commercial drone
| Object A | Carbon pipe Approx. outer diameter 20mm |
| Object B | Carbon pipe Approx. outer diameter 25mm |
| Product used | Anti-vibration resin double pipe clamp bracket set |
| Compatible diameter Ø | 20mm, 25mm |
| Bracket | 50mm |
This is an example of using carbon pipes combined with the lower space of a commercial drone to create room for mounting measuring equipment and a small PC. By combining and connecting this product, a stable mounting space is built as an aftermarket addition without drilling the aircraft.
It has a structure that balances rigidity and light weight, helping ensure stability in the air, where it is easily affected by wind.
Mounting a mirror on a handlebar end
| Object | Metal pipe |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 20mm |
This is an example of adding a separately sold metal pipe to the end of a bike handlebar and using it for offset mounting to shift the mirror position. By placing the mirror slightly away from the handlebar itself, it avoids interference with the controls while maintaining rear visibility.
Mounting a rear camera on a motorcycle
| Object | Rear camera for a drive recorder |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 20mm |
This is an example of mounting a rear camera for a drive recorder around the rear of a motorcycle. The cylindrical camera body is secured with this product and combined with an aluminum L-shaped angle, then fixed above the license plate. The vibration-damping rubber suppresses vibrations while riding, helping improve image stability.
Mounting a front screen on a motorcycle
| Object | Pipe around the headlight Example: HONDA XR Baja |
| Product used | Resin pipe clamp |
| Compatible diameter Ø | 20mm |
This is an example of attaching a windscreen to the front of a motorcycle by using a small-diameter pipe around the headlight for support. It is easy to retrofit and can be clamped in place partway through without a dedicated stay. It is gentle on the pipe and can be used stably even in vibration-heavy off-road riding.
Repairing a joint in a tension-type awning
| Object | Tension pole for awning |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 20mm |
This is an example of repairing a joint in the pole of a tension-type awning that was damaged due to age-related deterioration. By retightening the joint with this product, it is used as a temporary repair part to prevent the pole from separating or coming loose.
Anti-rotation measure for lantern pole joints
| Object | Lantern pole Example: Future Fox |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 20mm |
This is an example of using this product to address the problem of a lantern pole joint rotating. By adding this product to the joint, it can be used as a temporary anti-rotation measure.
Summary
We introduced examples of ideas using pipe clamp products compatible with Ø20mm diameters. Depending on the application and what you are securing, please also refer to examples using other sizes.