Examples of how to use 22mm-compatible pipe clamps
This page introduces examples of how to use pipe clamp products with compatible diameters of Ø22mm and Ø22.2mm. Please use them as reference examples for fixing, positioning, and anti-wobble applications such as PVC pipe VP16 (outer diameter 22mm), stainless steel pipe 15A (outer diameter 21.7mm), and inch-standard stainless steel pipe (outer diameter 22.2mm). We will continue adding new ideas.
Supporting a vertical PVC pipe (HIVP)
| Item | PVC pipe HIVP16 |
| Product used | Resin pipe clamp bracket set |
| Compatible diameter Ø | 22mm |
| Bracket | 150mm |
This is an example of using a pipe clamp to support a drainage PVC pipe (HIVP16) installed away from the wall, reducing wobble caused by wind and vibration. By choosing a 150mm bracket, it can firmly support piping even when it is set at a distance from the wall. The resin base can be glued in the desired orientation to match the structure of the exterior wall where it will be installed.
Supporting a water supply pipe around a shutoff valve
| Item | Water supply pipe Outer diameter approx. 22mm |
| Product used | Resin pipe clamp bracket set |
| Compatible diameter Ø | 22mm |
| Bracket | 50mm |
This is an example of using a wall-mounted support to reduce wobble in a water supply pipe installed under a kitchen. It is useful for repairs because stability can be restored without replacing the water supply pipe itself.
Securing a banner pole
| Item | Banner pole Example: permanent nobori banner |
| Product used | Vibration-damping resin pipe clamp |
| Compatible diameter Ø | 22mm |
This is an example of using a spear-type mounting bracket combined with angle material to make a banner pole stand on its own. By securing the pole away from the steel pipe, it preserves the banner's range of motion while reducing sway and tip-over from wind. It is also an easy method for temporary events or simple setups in front of a store.
Positioning a storage bag
| Item | Aftermarket car hanger bar |
| Product used | Resin pipe clamp |
| Compatible diameter Ø | 22mm |
This is an example of using it to keep a storage bag from shifting side to side while driving when it is hung from an in-car hanger bar. The product is installed inside the bag strap position to physically limit lateral movement. Because it is made of resin, it is less likely to damage the bar and can be used safely even in interior applications.
Installing an auxiliary light on an engine guard
| Item | Motorcycle engine guard |
| Product used | Resin pipe clamp |
| Compatible diameter Ø | 22.2mm |
This is an example of using the product as a substitute fog lamp clamp to attach an auxiliary light to a motorcycle engine guard. To apply torque and secure it firmly, several washers are inserted into the clearance area for a strong hold. Replacing a steel stay with this product also helps reduce weight.
Attaching a small holder to a handlebar
| Item | Handlebar of an electric assist bicycle Example: YAMAHA PAS |
| Product used | Resin pipe clamp |
| Compatible diameter Ø | 22.2mm |
This is an example of securing a portable air pump to a bicycle handlebar. For long-term use, a vibration-damping type is recommended to prevent shifting.
Installing a side bag support on a rear frame
| Item | Motorcycle rear frame Example: YAMAHA XSR700 |
| Product used | Vibration-damping resin pipe clamp |
| Compatible diameter Ø | 22mm |
This is an example of fixing wire lattice to the rear frame and using it as support for split side bags. The vibration-damping rubber reduces shaking while riding and improves bag stability.
Installing an electrical switch on a handlebar
| Item | Motorcycle handlebar Outer diameter 22.2mm |
| Product used | Vibration-damping resin pipe clamp |
| Compatible diameter Ø | 22mm |
This is an example of adding an electrical switch to a motorcycle handlebar after purchase. Instead of using a dedicated bracket, this product is used as a stay substitute. The vibration-damping rubber helps prevent shifting and rotation caused by vibration while riding.
Installing a motorcycle mount on a multi-bar
| Item | Motorcycle multi-bar Example: Daytona Multi Bar Holder |
| Product used | Resin pipe clamp |
| Compatible diameter Ø | 22.2mm |
This is an example of using it as a stay for attaching a motorcycle navigation unit or smartphone mount to a multi-bar. Combining it with a commercially available mount increases flexibility in installation position. Because it is made of resin, it is also less likely to scratch the bar surface.
Attaching a light to the front fork
| Item | Front fork of a bicycle Outer diameter approx. 22mm / oval shape |
| Product used | Vibration-damping resin pipe clamp |
| Compatible diameter Ø | 22mm |
This is an example of attaching a dynamo light to a bicycle front fork. The light mounting arm and spacer are inserted into the clamp's clearance section and fastened together. The vibration-damping rubber also conforms to an oval-shaped fork, allowing for stable attachment.
Repairing a laundry rack
| Item | Laundry rack support post |
| Product used | Vibration-damping resin pipe clamp |
| Compatible diameter Ø | 22mm |
This is an example of using it for an emergency repair of a laundry rack with a broken height-adjustment mechanism. By attaching it partway along the support post, it can be fixed at any desired height.
Summary
We introduced examples of practical uses for pipe clamp products with compatible diameters of Ø22mm and Ø22.2mm. Depending on the application and the object being fixed, please also refer to examples using other sizes.