On this page, we introduce use cases featuring pipe clamp products compatible with Ø25mm and Ø25.4mm pipes. Please use these as reference examples for fixing, positioning, and stabilization with standard stainless steel pipes (outer diameter 25mm) and inch-size stainless steel pipes (outer diameter 25.4mm, 1 inch). We will continue adding ideas from time to time.
Creating a stand for tool storage
| Item | Wooden round bar Outer diameter approx. 25mm |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 25mm |
This use case involved attaching wooden boards to both sides of a round bar post fixed to a log to create a stand for tool storage. Two of these products were used on the top and bottom to hold the entire board securely and stably. It is also a useful reference example for workshops, garages, and DIY spaces where you want to organize tools or create temporary storage.
Attaching a bag support to an engine guard
| Item | Motorcycle engine guard Example: BMW GS series |
| Product used | Anti-vibration resin pipe clamp with mount |
| Compatible diameter Ø | 25mm |
| Thread standard | M10 |
This example shows the product fixed to four points on a motorcycle engine guard (crash bar), with a plate attached using M10 screws to create a custom bag support. The anti-vibration design helps reduce riding vibration and resonance, improving stability when saddlebags are mounted. It is a popular DIY use case for soft pannier supports intended to prevent bags from getting caught in the wheel.
Mounting a floodlight to an outdoor post
| Item | Stainless steel pipe post Outer diameter approx. 25mm |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 25mm |
This example shows a floodlight mounted to a stainless steel pipe post installed outdoors. Even without a dedicated pole mounting bracket, it can be easily fixed by clamping from the side. The anti-vibration rubber helps prevent the light fixture from shifting or loosening, making it suitable for retrofitting outdoor equipment.
Securing a bimini top on a boat
| Item | Metal pipe post Outer diameter approx. 25mm |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 25mm |
This example uses the product as an alternative to a dedicated pipe fork clamp to secure a boat bimini top. Because it is made of resin, it is highly resistant to rust and can be used safely in marine environments. It also easily accommodates retrofitting to existing pipes. For use at sea, we recommend 316L bolts and nuts with high corrosion resistance.
Positioning the tabletop of a height-adjustable PC cart
| Item | Metal pole Outer diameter approx. 25mm |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 25mm |
This example shows the product used to fix the tabletop position on a PC cart whose lifting mechanism had become loose. The product is installed as a stopper to prevent the tabletop from slipping down. The anti-vibration rubber type also provides secure fastening while protecting the pole.
Repairing a joint on a clothesline pole
| Item | Telescopic clothesline pole Outer diameter approx. 25mm |
| Product used | Anti-vibration resin pipe clamp |
| Compatible diameter Ø | 25mm |
This example shows a joint on a clothesline pole that had broken due to age-related deterioration being repaired. By retightening the broken section with this product, separation can be prevented and the pole can be reused. It is also suitable for simple DIY repairs and emergency fixes.
Attaching a shade to a clothesline pole
| Item | Clothesline pole Outer diameter approx. 25.4mm |
| Product used | Resin pipe clamp |
| Compatible diameter Ø | 25.4mm |
This example shows a sunshade attached to a balcony clothesline pole. Since it can be clamped from the side, it allows retrofitting while making use of the existing pole. Being made of resin, it is also less likely to scratch the pole surface.
Hanging a circulator fan from a handrail
| Item | Handrail inside a yacht cabin Outer diameter approx. 25.4mm |
| Product used | Resin pipe clamp |
| Compatible diameter Ø | 25.4mm |
This example shows a small circulator fan hung from a handrail installed inside a yacht cabin. Even in the limited space on a boat, it can be mounted by using the existing rail. If vibration or swaying is a concern, the anti-vibration type is recommended.
Expanding an indoor clothes-drying rack
| Item A | Hanger rack Outer diameter approx. 25.4mm |
| Item B | Telescopic clothesline pole Outer diameter approx. 22.2mm |
| Product used | Resin double pipe clamp bracket set |
| Compatible diameter Ø | 25.4mm, 22.2mm |
| Bracket | 50mm |
This example shows a telescopic pole retrofitted and fixed at a right angle to a hanger rack. It is a DIY idea that combines and connects two pipes with different outer diameters to easily expand storage capacity for indoor drying.
Connecting a wheelchair and an IV stand
| Item A | Wheelchair frame Outer diameter approx. 25mm |
| Item B | IV stand post Outer diameter approx. 27mm |
| Product used | Anti-vibration resin double pipe clamp bracket set |
| Compatible diameter Ø | 25mm, 27mm |
| Bracket | 50mm |
This example shows a wheelchair frame and an IV stand post connected at right angles. Even pipes with different outer diameters can be joined into one unit with this product. The anti-vibration type helps improve safety and ease of handling.
Summary
We introduced examples of practical ideas using pipe clamp products compatible with Ø25mm and Ø25.4mm. Depending on the application and the object being fixed, please also refer to examples using other sizes.