top of page
PRODUCTS
Product Info
Plastic Pipe Clamp with Mount
FEATURE
●Plastic pipe clamp and plastic mount.
●For camera mount and supporting horizontal pipes suspended from the ceiling.
●The bolt diameter is "W3/8".
●Use weather-resistant grade resin. It has the durability to withstand certain outdoor environments.
●As the resin has moderate elasticity, it can be easily attached and detached from the middle of the pipe.
●Lightweight.
●Rust-proof. Can use it safely even around water.
●Excellent electrical insulation, wear resistance, heat resistance.
MATERIAL
●Plastic pipe clamp
Polypropylene (Weather-resistant grade)
●Plastic mount
Body: ABS resin
inside Hexagon nut/Plate: Iron (Unichrome plating)
●Plastic bolt and nut M6×28
Hexagonal bolt *Half thread: ABS resin | Hexagonal nut: ABS resin
●Plastic bolt and nut M8×40
Hexagonal bolt *Half thread: Nylon | Hexagonal nut: POM
●SUS bolt and nut M6×30
- Stainless steel (SUS304)
Hexagon socket head bolt *Full thread | Hexagon nut |
Flat washer x 2
●SUS bolt and nut M8×40
- Stainless steel (SUS304)
Hexagonal bolt *Full thread | Hexagonal nut | Flat washer x 2
NOTES
●Depending on the environment and period of use, such as exposure to direct sunlight or high temperatures, discoloration or deterioration may progress. "Black" is recommended outdoors. *Estimated durability: 7 to 9 years
●Support spacing of hanging piping within 1.5m.
●Be sure to screw the suspension bolt firmly to the deepest point before use.
●Please use in an environment with temperature up to 80℃.
●Product photos use representative sizes. The shape varies depending on the size.
●Small diameter and thick may be difficult to put on and take off.
●Actual color may differ depending on lighting and sunlight
●Depending on the size, gate marks may be noticeable.
●Recommended to tighten resin bolts and nuts by hand. If you tighten it too hard with a tool, the resin bolt may break.
COLOR
CATALOG
樹脂パイプクランプ マウント付のカタログは
下記からダウンロードしてご確認ください。
bottom of page